1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
\subsection{The {\tt MC:} module}\label{sect:MCData}
This component of the lattice code is dedicated to the Monte-Carlo solution of the transport
equation in multigroup approximation.
\vskip 0.02cm
The calling specifications are:
\begin{DataStructure}{Structure \dstr{MC:}}
\dusa{OUTMC}~$[$~\dusa{TRACK}~$]$~\moc{:=}~\moc{MC:}~$[$~\dusa{OUTMC}~$]$~\dusa{TRACK}~$\{$~\dusa{MICRO}~$|$~\dusa{MACRO}~$\}$~\moc{::}~\dstr{MC\_data} \\
\end{DataStructure}
\noindent where
\begin{ListeDeDescription}{mmmmmmm}
\item[\dusa{OUTMC}] {\tt character*12} name of a {\sc Monte-Carlo} (type {\tt L\_MC}) object open in modification or creation
mode.
\item[\dusa{TRACK}] {\tt character*12} name of a \dusa{NXT:} {\sc tracking} (type {\tt L\_TRACK}) object open in
read-only or modification mode. Object \dusa{TRACK} must be constructed with option \moc{MC} activated (see \Sect{NXTData}). Opening \dusa{TRACK}
in modification mode is useful to add tracking information to be plotted with module \moc{PSP:} (see \Sect{PSPData}).
\item[\dusa{MICRO}] {\tt character*12} name of a {\sc microlib} (type {\tt L\_LIBRARY}) object open in read-only mode. The information on
the embedded macrolib is used.
\item[\dusa{MACRO}] {\tt character*12} name of a {\sc macrolib} (type {\tt L\_MACROLIB}) object open in read-only mode.
\item[\dusa{MC\_data}] input data structure containing specific data (see \Sect{descMC}).
\end{ListeDeDescription}
\subsubsection{Data input for module {\tt MC:}}\label{sect:descMC}
\vskip -0.5cm
\begin{DataStructure}{Structure \dstr{MC\_data}}
$[$~\moc{EDIT} \dusa{iprint}~$]$ \\
\moc{KCODE}~\dusa{nsrck}~\dusa{ikz}~\dusa{kct} \\
$[$~\moc{SEED} \dusa{iseed}~$]~[$~\moc{N2N}~$]$ \\
$[$~\moc{TALLY} \\
\hskip 1.0cm $[$ \moc{MERG} $\{$ \moc{COMP} $|$ \moc{NONE} $|$ \\
\hskip 2.0cm \moc{REGI} (\dusa{iregm}(ii),ii=1,nregio) $|$ \\
\hskip 2.0cm \moc{MIX} $[$ (\dusa{imixm}(ii),ii=1,nbmix) $]~\}$ $]$ \\
\hskip 1.0cm $[$ \moc{COND} $[~\{$ \moc{NONE} $|$ ( \dusa{icond}(ii), ii=1,ngcond) $\}~]~]$\\
\moc{ENDT} $]$ \\
{\tt ;}
\end{DataStructure}
\noindent where
\begin{ListeDeDescription}{mmmmmmmm}
\item[\moc{EDIT}] keyword used to set \dusa{iprint}.
\item[\dusa{iprint}] index used to control the printing in module {\tt MC:}. =0 for no print; =1 for minimum printing (default value);
=100 to add free-path information in object \dusa{TRACK} (must be open in modification mode in that case).
\item[\moc{KCODE}] keyword used to define the power iteration settings.
\item[\dusa{nsrck}] number of neutrons generated per cycle
\item[\dusa{ikz}] number of inactive cycles
\item[\dusa{kct}] number of active cycles
\item[\moc{SEED}] keyword used to set the initial seed integer for the random number generator. By default, the seed integer is set from
the processor clock.
\item[\dusa{iseed}] initial seed integer
\item[\moc{N2N}] keyword used to enable an explicit treatment of $(n,2n)$ reactions. In this case, {\tt N2N} cross sections are
expected to be available in the macrolib. By default, $(n,2n)$ reactions are taken into account implicitly by the correction on scattering
cross sections.
\item[\moc{TALLY}] keyword used to define a tally (macrolib and effective multiplication factor). Using "\moc{TALLY~ENDT}" construct
permits to obtain a virtual collision estimation of the effective multiplication factor {\sl without} estimation of the macrolib
information.
\item[\moc{NONE}] keyword to deactivate the homogeneization or the condensation.
\item[\moc{MERG}] keyword to specify that the neutron flux is to be
homogenized over specified regions or mixtures.
\item[\moc{REGI}] keyword to specify that the homogenization of the neutron
flux will take place over the following regions. Here nregio$\le$\dusa{maxreg}
with \dusa{maxreg} the maximum number of regions for which solutions were
obtained.
\item[\dusa{iregm}] array of homogenized region numbers to which are
associated the old regions. In the editing routines a value of \dusa{iregm}=0
allows the corresponding region to be neglected.
\item[\moc{MIX}] keyword to specify that the homogenization of the neutron
flux will take place over the following mixtures. Here
we must have nbmix$\le$\dusa{maxmix} where \dusa{maxmix} is the maximum number
of mixtures in the macroscopic cross section library.
\item[\dusa{imixm}] array of homogenized region numbers to which are
associated the material mixtures. In the editing routines a value of
\dusa{imixm}=0 allows the corresponding isotopic mixtures to be neglected. For a mixture in this
library which is not used in the geometry one should insert a value of 0 for the
new region number associated with this mixture. By default, if \moc{MIX} is set and
\dusa{imixm} is not set, \dusa{imixm(ii)}$=$\dusa{ii} is assumed.
\item[\moc{COMP}] keyword to specify that the a complete homogenization is to
take place.
\item[\moc{COND}] keyword to specify that a group condensation of the flux is
to be performed.
\item[\dusa{icond}] array of increasing energy group limits that will be associated with
each of the ngcond condensed groups. The final value of
\dusa{icond} will automatically be set to \dusa{ngroup} while the values of
\dusa{icond}$>$\dusa{ngroup} will be droped from the condensation.
We must have ngcond$\le$\dusa{ngroup}. By default, if \moc{COND} is set and \dusa{icond}
is not set, all energy groups are condensed together.
\item[\moc{ENDT}] keyword used to terminate the definition of a tally.
\end{ListeDeDescription}
\eject
|
