1 files changed, 235 insertions, 0 deletions
diff --git a/doc/IGE351/SectDedition.tex b/doc/IGE351/SectDedition.tex
new file mode 100644
index 0000000..d2170ea
--- /dev/null
+++ b/doc/IGE351/SectDedition.tex
@@ -0,0 +1,235 @@
+\section{Contents of a \dir{edition} directory}\label{sect:editiondir}
+
+This directory contains the main editing results. For the purpose of illustration
+we will assume that the \moc{EDI:} module is executed using the following data:
+
+\vskip -0.1cm
+\begin{verbatim}
+EDITING := EDI: FLUX LIBRARY VOLMAT ::
+  MERG COMP COND 27 69 ALL SAVE ON EDITCELL2G ;
+\end{verbatim}
+\vskip -0.1cm
+
+\noindent
+where \moc{EDITING} is the final \dds{edition} data structure. The data structures \moc{FLUX},
+\moc{LIBRARY} and \moc{VOLMAT} are respectively of type \dds{fluxunk}, \dds{microlib} and
+\dds{tracking}. Assuming that the initial number of regions in \moc{VOLMAT} is $N$ and the number of
+groups in \moc{LIBRARY} is $G=69$, then the final information that will be stored in
+the \dds{editing} data structure will represent a two group ($G_{c}=2$) one mixture
+$N_{h}$ \dir{microlib}. 
+
+\subsection{State vector content for the \dir{edition} data structure}\label{sect:editionstate}
+
+The dimensioning parameters for this data structure, which are stored in the state vector
+$\mathcal{S}^{\rm edi}_{i}$, represent:
+
+\begin{itemize}
+\item The number of homogeneous mixtures saved $N_{H}=\mathcal{S}^{\rm edi}_{1}$ for the last editing step
+\item The number of condensed groups considered $M_{G}=\mathcal{S}^{\rm edi}_{2}$  for the last editing step
+\item Editing flag to indicate the presence of 4 factor editing $I_{4f}=\mathcal{S}^{\rm edi}_{3}$ for
+the last editing step
+\item Editing flag to indicate that the up-scattering contributions have all been transferred to
+      the diagonal part of the scattering matrix $I_{U}=\mathcal{S}^{\rm edi}_{4}$ for the last editing step
+\item The number of mixture activated $N_{A}=\mathcal{S}^{\rm edi}_{5}$ for the last editing step 
+\item Editing flag to indicate the types of statistics generated by \moc{EDI:}
+      $I_{S}=\mathcal{S}^{\rm edi}_{6}$ for the last editing step
+\item Editing flag to indicate which boundary flux editions are used in \moc{EDI:}. These editions are required for computing
+assembly discontinuity factors (ADF) or to perform some types of {\sl superhomog\'en\'eisation} (SPH) calculations.
+      $I_{\rm adf}=\mathcal{S}^{\rm edi}_{7}$ for the last editing step
+\begin{displaymath}
+I_{\rm adf} = \left\{
+\begin{array}{ll}
+0 & \textrm{no boundary flux editions;} \\
+1 & \textrm{use boundary currents obtained using the \moc{ALBS} keyword in DRAGON;} \\
+2 & \textrm{recover boundary fluxes from informations located in the {\tt REF:ADF} directory;} \\
+-2 & \textrm{compute assembly discontinuity factors (ADF) from informations located in} \\
+  & \textrm{the {\tt REF:ADF} directory;} \\
+3 & \textrm{use boundary currents obtained from the current iteration method in Eurydice;} \\
+4 & \textrm{recover boundary fluxes or discontinuity factors from the {\tt MACROLIB/ADF}} \\
+  & \textrm{directory.} \\
+\end{array} \right.
+\end{displaymath}
+\item Editing flag to indicate the type of tracking to be performed on a macro-geometry built by module {\tt EDI:}.
+      $I_{\rm cell}=\mathcal{S}^{\rm edi}_{8}$ for the last editing step
+\begin{displaymath}
+I_{\rm cell} = \left\{
+\begin{array}{ll}
+1 & \textrm{the macro-geometry is tracked by module {\tt SYBILT:} or {\tt EXCELT:};} \\
+2 & \textrm{the macro-geometry is tracked by module {\tt NXT:};} \\
+3 & \textrm{the macro-geometry is tracked by another module.} \\
+\end{array} \right.
+\end{displaymath}
+\item The number of extracted isotopes in the output microlib $I_{m}=\mathcal{S}^{\rm edi}_{9}$ for the last editing step
+\item The print level considered $I_{p}=\mathcal{S}^{\rm edi}_{10}$ for the last editing step
+\item Editing flag to indicate the types of cross section saved in \moc{EDI:}
+      $I_{x}=\mathcal{S}^{\rm edi}_{11}$ for the last editing step
+\item The type of weighting used for $P_1$ cross section information $I_{\rm w}=\mathcal{S}^{\rm edi}_{12}$ for the
+last editing step ($=0$: flux weighting; $=1$ current weighting)
+\item The maximum number of isotopes per mixture $M_{I}=\mathcal{S}^{\rm edi}_{13}$ 
+\item The maximum number of condensed groups in all editing $M_{g}=\mathcal{S}^{\rm edi}_{14}$ 
+\item The maximum number of homogeneous mixtures in all editing $M_{h}=\mathcal{S}^{\rm edi}_{15}$ 
+\item The total number of ISOTXS files generated $M_{F}=\mathcal{S}^{\rm edi}_{16}$ 
+\item The maximum number of regions before homogenization $M_{\rm max}=\mathcal{S}^{\rm edi}_{17}$ 
+\item Editing flag $=1$ for H-factor edition; $=0$ otherwise $I_{H-fac}=\mathcal{S}^{\rm edi}_{18}$ 
+\item Number of delayed neutron precursor groups $N_{\rm del}=\mathcal{S}^{\rm edi}_{19}$
+\item Geometry index $L_{\rm geo}=\mathcal{S}^{\rm edi}_{20}$
+\begin{displaymath}
+L_{\rm geo} = \left\{
+\begin{array}{ll}
+0 & \textrm{the macro geometry is not available}\\
+1 & \textrm{the macro-geometry of the last editing is available}\\
+\end{array} \right.
+\end{displaymath}
+\item Type of weighting for homogenization or/and condensation of cross-section information $I_{\rm adj}=\mathcal{S}^{\rm edi}_{21}$
+\begin{displaymath}
+I_{\rm adj} = \left\{
+\begin{array}{ll}
+0 & \textrm{use direct flux;} \\
+1 & \textrm{use adjoint flux.} \\
+\end{array} \right.
+\end{displaymath}
+\item Type of current used for $P_1$ weighting if $I_{\rm w}\ne 0$. $I_{\rm curr}=\mathcal{S}^{\rm edi}_{22}$
+\begin{displaymath}
+I_{\rm curr} = \left\{
+\begin{array}{ll}
+1 & \textrm{use a current obtained from an heterogeneous leakage model;} \\
+2 & \textrm{use the Todorova flux;} \\
+4 & \textrm{use spherical harmonics weighting.} \\
+\end{array} \right.
+\end{displaymath}
+\item Number of reactions saved on output microlib $N_{\rm reac}=\mathcal{S}^{\rm edi}_{23}$
+\begin{displaymath}
+N_{\rm reac} = \left\{
+\begin{array}{ll}
+0 & \textrm{all available reactions are saved;} \\
+>0 & \textrm{only reactions listed in {\tt REF:HVOUT} array are saved.} \\
+\end{array} \right.
+\end{displaymath}
+\item Edition flag for the integrated net currents along each axis $I_{\rm intcur}=\mathcal{S}^{\rm edi}_{24}$
+\begin{displaymath}
+I_{\rm intcur} = \left\{
+\begin{array}{ll}
+0 & \textrm{not set;} \\
+1 & \textrm{integrated current edition.} \\
+\end{array} \right.
+\end{displaymath}
+\item Type of condensation of the diffusion coefficients $I_{\rm golver}=\mathcal{S}^{\rm edi}_{25}$
+\begin{displaymath}
+I_{\rm golver} = \left\{
+\begin{array}{ll}
+0 & \textrm{use weighting of leakage coefficients;} \\
+1 & \textrm{use weighting of transport cross sections with the Golfier-Vergain correction} \\
+ & \textrm{factors.} \\
+\end{array} \right.
+\end{displaymath}
+
+\end{itemize}
+
+\subsection{The main \dir{edition} directory}\label{sect:editiondirmain}
+
+On its first level, the
+following records and sub-directories will be found in the \dir{edition} directory:
+
+\begin{DescriptionEnregistrement}{Main records and sub-directories in \dir{edition}}{7.0cm}
+\CharEnr
+  {SIGNATURE\blank{3}}{$*12$}
+  {Signature of the data structure ($\mathsf{SIGNA}=${\tt L\_EDIT\blank{6}}).}
+\IntEnr
+  {STATE-VECTOR}{$40$}
+  {Vector describing the various parameters associated with this data structure $\mathcal{S}^{\rm edi}_{i}$,
+  as defined in \Sect{editionstate}.}
+\CharEnr
+  {TITLE\blank{7}}{$*72$}
+  {Title of the last editing performed ($\mathsf{TITLE}$) }
+\OptCharEnr
+  {LAST-EDIT\blank{3}}{$*12$}{$|\mathcal{S}^{\rm edi}_{11}|\ge 2$}
+  {Name of the last editing sub-directory saved ($\mathsf{LAST}$)}
+\CharEnr
+  {LINK.GEOM\blank{3}}{$*12$}
+  {Name of the {\sc geometry} on which the last edition was based.}
+\IntEnr
+  {REF:IMERGE\blank{2}}{$\mathcal{S}^{\rm edi}_{17}$}
+  {Merged region number associated with each of the original region number $M_{r}$}
+\RealEnr
+  {REF:VOLUME\blank{2}}{$\mathcal{S}^{\rm edi}_{17}$}{cm$^{3}$}
+  {Volume associated with each of the original region number $V_{r}$}
+\IntEnr
+  {REF:MATCOD\blank{2}}{$\mathcal{S}^{\rm edi}_{17}$}
+  {Mixture number associated with each of the original region number $M_{\rm mix}$}
+\IntEnr
+  {REF:IGCOND\blank{2}}{$\mathcal{S}^{\rm edi}_{2}$}
+  {Reference group limits associated with the merged groups $C_{g}$}
+\OptDirEnr
+  {REF:ADF\blank{5}}{$\mathcal{S}^{\rm edi}_{7} = 2$}
+  {ADF--related input data as presented in \Sect{editionADF}.}
+\OptCharEnr
+  {REF:HVOUT\blank{3}}{$(\mathcal{S}^{\rm edi}_{23})*8$}{$\mathcal{S}^{\rm edi}_{23} > 0$}
+  {Names of the reactions saved in the output microlib.}
+\OptCharEnr
+  {CARISO\blank{6}}{$(\mathcal{S}^{\rm edi}_{9})*12$}{$\mathcal{S}^{\rm edi}_{9}\ge 1$}
+  {Name of extracted isotopes saved during the last editing ($\mathsf{NAMI}$)}
+\OptIntEnr
+  {IACTI\blank{7}}{$\mathcal{S}^{\rm edi}_{5}$}{$\mathcal{S}^{\rm edi}_{5}\ge 1$}
+  {Original mixture numbers for which activation data was generated ($A_{m}$)}
+\OptDirEnr
+  {MACRO-GEOM\blank{2}}{$\mathcal{S}^{\rm edi}_{20} = 1$}
+  {Macro--{\sl geometry} directory. This geometry may be used to complete the {\sc compo} database, for performing
+  a geometry equivalence ({\sl equigeom}) and/or as the macro--geometry in SPH calculations. This directory follows
+  the specification presented in \Sect{geometrydirmain}.}
+\OptCharEnr
+  {LINK.MACGEOM}{$*12$}{$\mathcal{S}^{\rm edi}_{20} = 1$}
+  {Name of the macro--{\sl geometry} on which the last edition was based.}
+\DirVar
+  {\listedir{micdir}}
+  {Set of sub-directories containing the editing information. This directory follows
+  the specification presented in \Sect{microlibdirmain}.}
+\end{DescriptionEnregistrement}
+
+The set of directory \listedir{micdir} names $\mathsf{EDIDIR}$ will be composed according to the
+following rules. In the case where the set of keywords \moc{SAVE}
+\moc{ON} are used followed by a directory name as above, the contents of
+$\mathsf{EDIDIR}$ will be identical the name of the specified directory
+(e.~g., \verb*|EDITCELL2G  |). If the \moc{SAVE} option is used without specifying a specific
+directory, then the first eight characters of $\mathsf{EDIDIR}$ ($\mathsf{EDIDIR}$\verb*|(1:8)|)
+will be given as
+\verb*|REF-CASE| while the last four character ($\mathsf{EDIDIR}$\verb*|(9:12)|) will be a
+unique character variable representing the successive directory saved. This character variable will
+be created as follows:
+\vskip -0.1cm
+$$
+\mathtt{WRITE(}\mathsf{EDIDIR}\mathtt{(9:12),'(I4.4)')}\: J
+$$
+\vskip -0.1cm
+where $1\leq J $ represents the $J^{\textrm{th}}$ execution of the \moc{EDI:} module. In the case
+above, we would have a single editing directory of the form: 
+
+\begin{DescriptionEnregistrement}{Example of an editing directory}{8.0cm}
+\DirEnr
+  {EDITCELL2G\blank{2}}{Two groups \dir{microlib} sub-directory}
+\end{DescriptionEnregistrement}
+
+\goodbreak
+
+\subsection{The \moc{/REF:ADF/} sub-directory in \dir{edition}}\label{sect:editionADF}
+
+Sub-directory containing input data for ADF-type boundary flux edition.
+
+\begin{DescriptionEnregistrement}{Records in the \moc{/REF:ADF/} sub-directory}{7.5cm}
+\IntEnr
+  {NTYPE\blank{7}}{$1$}
+  {Number of ADF-type boundary flux edits.}
+\IntEnr
+  {NADF\blank{8}}{\tt NTYPE}
+  {$N^{\rm adf}_i$: number of regions included in each ADF-type boundary flux edit.}
+\CharEnr
+  {HADF\blank{8}}{({\tt NTYPE})$*8$}
+  {Name of each ADF-type boundary flux edit. Standard names are: $=$ \moc{FD\_C}:
+corner flux edition; $=$ \moc{FD\_B}: surface (assembly gap) flux edition; $=$ \moc{FD\_H}:
+row flux edition. These are the first row of surrounding cells in the assembly.}
+\IntVar
+  {\listedir{type}}{$N^{\rm adf}_i$}
+  {Set of integer arrays containing the editing information. Indices of the regions of the reference geometry belonging to the
+  flux edition. Name {\sl type} is a component of {\tt HADF} array.}
+\end{DescriptionEnregistrement}
+
+\clearpage