1 files changed, 202 insertions, 0 deletions
diff --git a/doc/IGE335/Section5.05.tex b/doc/IGE335/Section5.05.tex
new file mode 100644
index 0000000..87fe8ed
--- /dev/null
+++ b/doc/IGE335/Section5.05.tex
@@ -0,0 +1,202 @@
+\subsection{WIMSD4 microscopic cross-section examples.}\label{sect:ExWWIMSD4} 
+
+The test cases we will consider here use the \moc{LIB:} module to enter
+microscopic cross sections taken from a WIMSD4 69 groups library. We will assume
+that this library is located in file {\tt iaea}. The test cases are numbered
+successively from \tst(TCWU01) to \tst(TCWU31). 
+
+
+\subsubsection{\tst(TCWU01) -- The Mosteller benchmark.}
+
+\begin{figure}[h!]  
+\begin{center} 
+\epsfxsize=5cm \centerline{ \epsffile{GTCW01.eps}}
+\parbox{14cm}{\caption{Geometry for the  Mosteller
+benchmark problem.}\label{fig:TCWU01}}   
+\end{center}  
+\end{figure}
+
+This benchmark uses both a cartesian 2-D cell with a central annular pin and an
+equivalent annular cell.\cite{Mostel} No depletion information is required in
+this case since the module \moc{EVO:} will not be executed. A comparison between
+various calculation options is provided here. We first consider the annular
+geometry with a \moc{SYBILT:} self-shielding and a \moc{SYBILT:} transport
+calculation. This is then repeated for the cartesian 2--D cell. Finally, we used
+an isotropic (\moc{TISO}) and a specular (\moc{TSPC}) \moc{EXCELT:} tracking
+successively for the self-shielding and transport calculations.
+
+\listing{TCWU01.x2m}
+
+\subsubsection{\tst(TCWU02) -- A $17\times 17$ PWR type assembly}
+
+\begin{figure}[h!]  
+\begin{center} 
+\epsfxsize=12cm \centerline{ \epsffile{GTCW02.eps}}
+\parbox{14cm}{\caption{Geometry for test case \tst(TCWU02).}\label{fig:TCWU02}}
+\end{center}  
+\end{figure}
+
+This test case represents a production calculation of a normal PWR assembly
+with cell grouping (\moc{MERGE} and \moc{TURN} options). Its configuration is
+shown in \Fig{TCWU02}.
+
+\listing{TCWU02.x2m}
+
+\subsubsection{\tst(TCWU03) -- An hexagonal assembly}
+
+\begin{figure}[h!]  
+\begin{center} 
+\epsfxsize=11cm \centerline{ \epsffile{GTCW03.eps}}
+\parbox{14cm}{\caption{Geometry for test case \tst(TCWU03).}\label{fig:TCWU03}}   
+\end{center}   \end{figure}
+
+This test case represents a production calculation of a
+typical hexagonal control assembly. Its configuration is presented in
+\Fig{TCWU03}.
+                                                            
+\listing{TCWU03.x2m}
+
+\subsubsection{\tst(TCWU04) -- A Cylindrical cell with burnup.}
+
+\begin{figure}[h!]  
+\begin{center} 
+\epsfxsize=15cm \centerline{ \epsffile{GTCA04.eps}}
+\parbox{14cm}{\caption{Depletion chain of heavy
+ isotopes.}\label{fig:TCA04}}    \end{center}   \end{figure}
+
+This test case represents a burnup calculation for the mosteller annular
+geometry.
+
+\listing{TCWU04.x2m}
+
+\subsubsection{\tst(TCWU05) -- A CANDU-6 type annular cell with burnup.}
+
+\begin{figure}[h!]  
+\begin{center} 
+\epsfxsize=9cm \centerline{ \epsffile{GTCW05.eps}}
+\parbox{14cm}{\caption{Geometry of the CANDU-6 cell.}\label{fig:TCWU05}}   
+\end{center}  
+\end{figure}
+
+This test case represents the typical CANDU type cell with an annular moderator
+region defined in \Fig{TCWU05}. Both its cross section and depletion data are
+taken from the same WIMSD4 file. Depletion calculations are performed for 50 day at
+a fixed power.\cite{Mtl93b} The {\sc microlib} is defined by the procedure
+{\tt TCWU05Lib.c2m} presented in \Sect{TCWU05Lib}.
+
+\listing{TCWU05.x2m}
+
+\subsubsection{\tst(TCWU06) -- A CANDU-6 type supercell with control rods.}
+
+This test case treats both the CANDU cell with a cartesian moderator region
+(similar to the cell described in defined \Fig{TCWU05}) and the
+supercell containing a stainless steel rod which can be either in the inserted
+or extracted position (see \Fig{TCM04}). Two groups incremental cross sections
+corresponding to the rod in the inserted and extracted position with respect to
+the original supercell containing only 3--D fuel elements are computed.\cite{Mtl93b}
+The {\sc microlib} is defined by the procedure {\tt TCWU05Lib.c2m} presented in \Sect{TCWU05Lib}.
+
+\listing{TCWU06.x2m}
+
+
+\subsubsection{\tst(TCWU07) -- A CANDU-6 type calculation using various leakage
+options.}
+
+This test case treats the CANDU cell with a cartesian moderator region
+(similar to the cell described in defined \Fig{TCWU05}) using various leakage
+options. The {\sc microlib} is defined by the procedure {\tt TCWU05Lib.c2m} presented in \Sect{TCWU05Lib}.
+
+
+\listing{TCWU07.x2m}
+
+\subsubsection{\tst(TCWU08) -- Burnup of an homogeneous cell.}
+
+This case illustrate the burnup of an homogeneous cell that spends the first
+1000 days in a reactor before being removed. The depletion of the isotopes in
+this cell for an additional 1000 days outside of the core is also investiguated.
+
+\listing{TCWU08.x2m}
+
+\subsubsection{\tst(TCWU09) -- Testing boundary conditions.}
+
+This case test different boundary conditions for the Mosteller cell.
+
+\listing{TCWU09.x2m}
+
+\subsubsection{\tst(TCWU10) -- Fixed source problem in multiplicative media.}
+
+This case verify the use of a fixed source inside a cell where fission also
+takes place.
+
+\listing{TCWU10.x2m}
+
+\subsubsection{\tst(TCWU11) -- Two group burnup of a CANDU-6 type cell.}
+
+This case is similar to \tst(TCWU05) except that the burnup module
+uses DRAGON generated two groups time dependent microscopic cross sections.
+The {\sc microlib} is defined by the procedure {\tt TCWU05Lib.c2m} presented in \Sect{TCWU05Lib}.
+
+\listing{TCWU11.x2m}
+
+\subsubsection{\tst(TCWU12) -- Mixture composition.}
+
+This case illustrates the use of the \moc{INFO:} module of DRAGON 
+(see \Sect{INFOData}) as well as the new \moc{COMB} option in the module 
+\moc{LIB:} (see \Sect{LIBData}).
+
+\listing{TCWU12.x2m}
+
+\subsubsection{\tst(TCWU13) -- Solution by the method of cyclic characteristics}\label{sect:ExTCWU13}
+
+This case illustrates the use of the \moc{MOCC:} module of DRAGON for a solution by the transport equation by the method of cyclic
+characteristics. This test case also uses the embedded DRAGON procedure stored in the {\tt TCWU05Lib.c2m} file.
+
+\listing{TCWU13.x2m}
+
+\subsubsection{\tst(TCWU14) -- SPH Homogenisation without tracking}\label{sect:ExTCWU14}
+
+This case illustrates the use of the \moc{SPH} homogenisation procedure in the \moc{EDI:} module of DRAGON when a tracking data
+structure is provided as input. This test case also uses the embedded DRAGON procedure stored in the {\tt TCWU05Lib.c2m} file.
+
+\listing{TCWU14.x2m}
+
+\subsubsection{\tst(TCWU15) -- A CANDU--6 type Cartesian cell with burnup}\label{sect:ExTCWU15}
+
+This test case is similar to \tst{TCWU05} except that the cell boundary are Cartesian and the \moc{NXT:} tracking module is used. It uses the embedded DRAGON procedure stored in the {\tt TCWU05Lib.c2m} file.
+
+\listing{TCWU15.x2m}
+
+\subsubsection{\tst(TCWU17) -- A 2-D CANDU--6 supercell with control rods}\label{sect:ExTCWU17}
+
+\begin{figure}[h!]  
+\begin{center} 
+\parbox{15.0cm}{\epsfxsize=15cm \epsffile{GTCW17.eps}}
+\parbox{14cm}{\caption{Geometry of 2-D CANDU--6 supercell with control rods.}\label{fig:TCWU17}}   
+\end{center}  
+\end{figure}
+
+This test case treats a 2-D CANDU--6 supercell containing fuel clusters and control rods (see \Fig{TCWU17}). The use of the virtual homogenization mixtures defined by \moc{HMIX} is also illustrated. This test case uses the embedded DRAGON procedure
+stored in the {\tt TCWU17Lib.c2m} file.
+ 
+\listing{TCWU17.x2m}
+
+\subsubsection{\tst(TCWU17Lib) -- Microlib definition.}\label{sect:TCWU17Lib}
+
+This CLE-2000 procedure is used in data-set {\tt TCWU17} to define the {\sc microlib} isotopic content.
+
+\listing{TCWU17Lib.c2m}
+
+\subsubsection{\tst(TCWU31) -- Compo-based two group burnup of a CANDU-6 type cell.}
+
+This case is similar to \tst(TCWU11) except that the two-group burnup calculation
+recover all its information from a {\sc compo} database.
+The {\sc microlib} is defined by the procedure {\tt TCWU05Lib.c2m} presented in \Sect{TCWU05Lib}.
+
+\listing{TCWU31.x2m}
+
+\subsubsection{\tst(TCWU05Lib) -- Microlib definition.}\label{sect:TCWU05Lib}
+
+This CLE-2000 procedure is used in previous data-sets to define the {\sc microlib} isotopic content.
+
+\listing{TCWU05Lib.c2m}
+\eject